Ramu Ramanathan (RR): At the outset let me congratulate you on your re-election as the president of IPAMA. Is it the same team and what are your plans now?

KS Khurana (KSK): Yes, it is the same team. We were told that the team performed well during the last PrintPack India show, which took place in February 2013 and hence we were asked to continue. I would like to state very humbly that when I took charge as the president, my first address to the team was to convey this message: I need two things, smile on the face of the exhibitors and smile on the face of the visitors.

 

RR: What is the status of IPAMA’s strategy of alliance with NPES and with your European partners?

KSK: IPAMA is a part of Global Print, an international federation of printing industry members created to further the common interests and mutual understanding of manufacturers of printing, paper-making and converting machinery, equipment and consumables. And so is NPES. During the last PrintPack India show, NPES hosted a conference, which received good response. We are in regular touch with members of countries who are a part of Global Print. During Print ’13, we had a meeting with Global Print members and have put forth our proposal of JVs, sharing of technology and matching partners to start manufacturing in India for products which are not produced in India, but are in demand in India.

 

RR: What are you looking at?

KSK: We are looking for technology partnership as well as setting up a base in India. There are print companies in India who still invest in secondhand machines. The point is, they are not getting proper service from the manufacturing company for their machines or parts. What IPAMA is trying to do is speak to these manufacturing companies and ask them to set up a service centre in India with assistance from a matching partner and IPAMA.

 

RR: What about Asian Print?

KSK: Asian Print is another organisation with members from countries like China, Malaysia, Korea, India, Pakistan, Bangladesh and Sri Lanka. We sit together once in year and discuss on the dates of the shows and ensure our events do not clash with each other. In countries like Sri Lanka, for companies willing to set up centres, IPAMA offers newer machineries to install in their centres.

 

RR: Is it a possibility that India becomes a hub for small partsas most of the foundries are shutting down in Europe?

KSK: Yes we are exploring the possibility; in the foundries, automobile sectors and spare parts. What I am suggesting to my members of IPAMA is to come forward with some new machines, join hands in collaborations. I feel  maintaining quality is important, which is why, IPAMA is trying to conduct seminars and create awareness among members.

 

RR: IPAMA’s partnership in Sharjah. Is it a long-term plan?

KSK: It’s a long-term plan signed by IPAMA for 20 years. Our next show is scheduled in  April 2014. The Asian Print members will travel to  Sharjah/India, see how we are working for the industry. Our motive is to have a gateway for the Middle East firms, Africa and Pakistan. Today, companies in Africa and Pakistan are buying machines from Dubai. What we hope is to explore the markets in Dubai through this partnership. Plus the transportation is not difficult.

 

RR: How big will the show in Sharjah? ?

KSK: We are trying our best. We have a good number of enquiries. People are interested. That said, it’s too early to say anything, we need one-two more months to mobilise things.

 

RR: Other aspect of IPAMA is the government-based initiatives, and bringing customers to India directly on a B2B basis. What’s the objective behind this.

KSK: We took a delegation to Drupa last year, which was supported by the government. Some of our members received support for participating in PrintPack India, which was subsidised by NSIC. We are now planning to invite a delegation of buyers from other countries to visit our show. We hope to receive funds support travel cost of the delegation. The objective is: to encourage our members, to visit and explore the possibility of creating new technology machines in India.

 

RR: What is IPAMA’s focus for the Sharjah show?

KSK: We are planning to visit every country in the Middle East for the visitor promotions. The Chamber of Commerce in Sharjah has assured a meeting with the printers in the Middle East and IPAMA will share what machines are manufactured in India because most of the people there don’t prefer to come here but they go to the European market.

 

RR: Specific initiatives other than exhibitions and shows?

KSK: We are currently focussing on encouraging our members on forming joint ventures. We are encouraging our members to work on manufacturing machines that are not manufactured in India. We are also planning to set up a panel of engineers to assist our manufacturing requirements. They may be hydraulic or mechanical or and field of engineering. This IPAMA subsidised panel will help the members and other manufacturers to take assistance or consultation regarding any technical issues with machine manufacturing.

 

RR: Other than Faridabad, which are the other hubs that have active participation with IPAMA.

KSK: After Faridabad, it is Amritsar. The hub at Amritsar manufactures corrugated box making machines, die-cutting machines, paper cutting machines and small machines for perforation work. Around 125 die-cutting machines a month are produced which alone is 80% of India’s total production. Ahmedabad in Gujarat is doing well, Coimbatore has around eight players, which again is doing good. Trivandrum is doing very well, Karnataka is also quite strong.

 

RR: What steps has IPAMA taken in terms of the question of imported machineries?

KSK: The role of IPAMA is clear; we don’t say don’t buy. We have to produce quality in India. Whichever technology is not available in India, you can definitely import it because you have to produce a good quality product. But if a machine technology, which is comparable with the kit produced overseas, we should try and use it instead of going for a secondhand or a thirdhand imported equipment. Herein, I request the Indian printer to help the manufacturer to build the machines with the local resources.

 

RR: What are the machines which Five Star Printing Machinery is manufacturing ?

KSK: Five Star Printing Machinery was started in 1981. Since then, we have specialised in manufacturing of paper-cutting machines and die cutting  machines. From the last five years we are manufacturing foil printing attachments. In the binding sector, we manufacture board cutters. There is the slitting machines for the spine cutter is a special equipment in binding hardcover books, plus multi-purpose punching machine for spiral, wiro, spico, etc.

 

RR: What is happening with Five Star Printing Machinery?

KSK: Currently we are making paper-cutting machines and die-cutting machines. We have started a new unit for manufacturing six head, plus double head saddle-stitching machines with automatic folding systems. Automatic and semi-automatic creasing perforation and half-cutting machine. We are working on a new machine, which we hope to introduce Print Pack Arabia 2014.

 

RR: How do you see the book publication industry evolve?

KSK: Not only in publication, but there is demand in stationeries especially notebooks. So many companies in India are exporting huge amount of notebooks to other countries. This along with the book and publication are booming segments, and the future hold good potential.

 

RR: How much of your percentage are you exporting?

KSK: It is 15% to 20% currently. We hope to boost our exports by at least 10% post Print Pack Arabia 2014.