Vinsak Lombardi open house lets you see, know the Synchroline
Everyone connected with labels are talking about flexo technology, about how flexo is evolving. Some label equipment manufacturer talk about reduced web-length. Some are talking about mechanical advancements in presses. Some enforce those very mechanical components, employing electronic features to make the presses more efficient.
22 Aug 2015 | 5524 Views | By PrintWeek India
Vinsak, the Indian representative for Lombardi hosted an open house on 22 August, 2015 that showcased the features of Lombardi Synchroline 430 flexo press. Gurgaon-based A&A Labels, took delivery of India’s first Lombardi press, the Synchroline 430, with an eye on expanding its label business. “This is our seventh flexo press. At present, we are doing four lakh sq/meter of labels per month and that's only a fraction of the demand for labels,” said Anubhav Jain, one of the two directors at A&A. Saurabh Jain, his cousin, is the other director.
Jain said he opted for Lombardi Synchroline for several reasons, among them was the level of automation the press offers. “First of all, the press has a dramatically low number of operations
needed by the operator to set up a print job. And that makes the press easy and quick.”
Explaining what went into developing the Synchroline, Massimo Lombardi, international sales manager for the company, told the PrintWeek India team, “The Synchroline was born as the servo motor upgrade to the Flexoline model, which was launched in 2007. Some of the mechanical components were already present on the Flexoline press got a dramatic deflection.”
Lombardi added, “We tried to conceive a press with as less as possible the number of regulations, that are common on our competitors machines.”
As a result, the Synchroline, launched in 2011 got the servo motors powered by a new electronic board with a system of register control, to make the press more accurate; a register control in real time that continuously checks for the consistency during the acceleration phases at high speed; and also the set up of the next print unit of the same job. It then evolved with an ABS that calculates and exerts the amount of pressure required for the worn out blade, in this case across the blade, at a touch of a button.
“We believe the print unit of the Synchroline is a masterpiece of mechanical accuracy and simplicity,” said Lombardi.
Worldwide, Lombardi has installed 135 Flexoline and Synchroline presses.
Alongside was the Vinsak LSR range of slitter rewinders with 100% defect detection systems installed by A&A last November.
Later in the evening Vinsak also hosted a seminar, the highlight of which was a panel discussion on packaging and brand protection.